Lushan Win Tone Engineering Technology Co., Ltd

Language

Home page

HTX Series Wheat Dehulling Machine

The HTX series wheat peeling machine is primarily used as a layer-by-layer peeling device in flour-processing enterprises. It can remove 2–3 layers of the wheat’s outer husk according to customer requirements, reducing the pressure on subsequent milling machines. This machine effectively removes surface impurities and mycotoxins from wheat, lowers the ash content of the finished flour, and enhances the whiteness and purity of the flour. The HTX series wheat peeling machine features built-in motor technology, which saves installation space. Equipped with a high-strength main shaft and highly wear-resistant sand rollers, the machine ensures continuous operation and a long service life. The main shaft incorporates bidirectional air intake, while the discharge port uses suction, which not only reduces the temperature of the finished product but also performs multi-stage cleaning of impurities and husks from the material.

Category:

Peeling and Shelling Equipment Series

Phone:

+86-400-115-2118

Email:

1523241508@qq.com

Inquiry

Keywords:

HTX Series Wheat Dehulling Machine

Device Introduction

The HTX series wheat peeling machine is primarily used as a layer-by-layer hulling device in flour-processing enterprises. It can remove 2–3 layers of the wheat’s outer husk according to customer requirements, reducing the pressure on subsequent milling machines. This machine also effectively removes surface impurities and mycotoxins from wheat, lowering the ash content of the finished flour and enhancing its whiteness. The HTX series wheat peeling machine features built-in motor technology, which saves installation space. Equipped with a high-strength main shaft and highly wear-resistant sand rollers, it ensures long-term continuous operation and durability. The main shaft incorporates bidirectional air intake, while the discharge port uses suction, which not only lowers the temperature of the finished product but also performs multi-stage cleaning of impurities and husks from the material.

Innovative Technology for Semi-Dry Extraction of Corn Germ and Bran, and Production of Low-Fat Corn Flour

Section One

Detoxify and reduce the processing stage.

After cleaning and separation, the equipment removes organic impurities from the raw grains as well as various mycotoxins adhering to the surface of the grains, thereby ensuring food safety.

Section Two

Homogeneous De-embryonation Screening Section

Using the double-cone rubbing and embryo-removal screening equipment, corn kernels are rubbed into four-, six-, or eight-lobed segments, ensuring that the germ remains undamaged and its integrity is fully preserved.

Section Three

Optoelectronic Technology – Grading and Embryo Extraction Section

AI-optoelectronic technology equipment is used to effectively separate pure germ and pure endosperm.

Section Four

Tippy Selected Work Section

Equipped with adjustable micro-negative-pressure suspension technology, this system achieves a gentle separation of the skin from the endosperm granules based on their differing densities.

Section Five

Light R&D Powder Section

The graded endosperm is processed through advanced light milling and fine grinding technologies to produce yellow, low-fat corn flour. All physicochemical indicators meet the requirements for application in sugar fermentation processes.

Performance Features

High efficiency and energy saving, with lower energy consumption.

By adopting an optimized power configuration and energy-efficient motors, this equipment significantly reduces energy consumption compared to conventional models, delivering outstanding operational cost-effectiveness. The highly efficient peeling process minimizes unnecessary energy consumption, resulting in low energy consumption per unit of material processed and providing clear long-term cost advantages.

Compact structure, small footprint.

The entire machine boasts a compact and rational design, occupies a small footprint, and does not require extra large installation space. It is compatible with complete production line layouts and can be seamlessly integrated into various processing assembly lines, making it standard equipment for large-scale production.

Stable operation, long service life

Equipped with a high-strength spindle and a highly wear-resistant grinding roller, the core components feature high strength and excellent wear resistance, effectively resisting wear and tear from continuous operation. The mechanical structure boasts a mature design with a low failure rate, ensuring long-term stable and continuous operation of the equipment and extending the service life of the entire machine.

Improve the whiteness of flour and optimize its quality.

Precisely removes impurities, dust, and mycotoxins adhering to the surface of wheat, thereby reducing the ash content of the finished flour at the source. Reduces the impact of residual bran on the finished product, significantly enhancing the whiteness and purity of the flour and elevating the product’s grade.

Cooling and impurity removal in one step, enhancing quality and protecting materials.

The spindle features a bidirectional air intake and a suction design at the discharge port, effectively reducing the temperature of the finished product during processing and preventing high-temperature degradation. Equipped with a multi-stage impurity removal system, it achieves efficient separation of husks and other impurities from the raw materials, further purifying the material and ensuring the quality of the finished product.

Highly adaptable, compatible with production lines.

Specifically designed for complete production lines, with standardized interfaces that enable seamless integration with downstream processing equipment such as milling machines and screening units. Suitable for wheat-processing needs of various scales—whether small- to medium-sized production lines or large-scale complete sets of equipment—this solution provides stable compatibility across the board.

Live Shooting

SERVICE PROCESS

Prodluctivty,awvalabily, and proces optimisaion are of utmost importance forour customers.To best senve ourcustomers and respond to ther individual reguirements,we ofer an extensive range of
services as well as a wide variety of tests in our pilot plant.

Pre-sales consultation

Customized Solutions

Draft Construction Plans

Assembly & Commissioning

Maintenance & Repair

Technical Parameters

Model	Production (k/h)	Spindle speed	Fan speed	Sand roller diameter	Sand roller length	Power (kW)	External dimensions
HTX-18	2-2.5	1300	2940	174	660	18.5–22+2.2	1935×735×1892
HTX-25	3-4	1050	2940	234	600	22-30+2.2	2013 × 693 × 2222
HTX-30	4-6	850	2940	282	800	37-45+2.2	2191×950×2222
HTX-25×2	6-8	1050	2940	234	600	44-60+3	2033×1450×2222
HTX-30×2	8-12	850	2940	282	800	74-90+3	2332×4150×2222

Special Notice:

Due to the transition period associated with certain equipment upgrades and online display adjustments, the graphic and textual parameters shown on the page may differ from those of the actual devices. Therefore, the content displayed on the page should not be used as the basis for making a purchase. The specific model and technical specifications shall be subject to the configuration of the actual device once confirmed. Prospective buyers are advised to promptly contact our sales staff for confirmation. Our company reserves the right to modify image parameters and to provide the final interpretation.

Online Quotation

More products

HTP1200-C Intelligent Double-Conical Dehulling Machine

HXP320 Grain Gravity Separator

HRF70X2-C Smart Bran and Husk Separator

HTY1000X2-A Intelligent Duplex Centrifugal Shelling Machine

Related Engineering

Complete set of equipment for producing cooked corn flour

Corn flour (low-fat powder) processing complete equipment

Corn Germ Extraction Complete Equipment Set (Corn Co-production Line, Semi-Dry Corn Processing Line)

Barley processing complete set of equipment

Lushan County Huayu Wantong Engineering Technology Co., Ltd.

E-MAlL:info@wintonemachinery.com

Whatsapp :+86 199 3949 7332

Lushan Win Tone Engineering Technology Co., Ltd

Phone:+86-371-86159555

Whatsapp :+86 199 3949 7332

WeChat:+86-199 3739 2058

info@wintonemachinery.com

Address: East of the intersection of Xinggong Road and Central Road, Northern Area, Lu Shan Industrial Cluster Zone, Pingdingshan City, Henan Province, China

Online consultation

Leave an online message and get a free quote

Privacy Agreement Supports IPV6 SEO

Business license

COOKIES

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

COOKIES

required

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

analyze

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

Feature

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

advertise

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

LINKS：

Customer Service

+86-400-115-2118

Time

0:00 - 24:00
WhatsApp

8619937887598
Email

1523241508@qq.com
Tel

+86-19937887598

HTX Series Wheat Dehulling Machine

COOKIES

COOKIES

Sorry，当前栏目暂无内容!

Sorry，The current column has no content!