For the grain processing industry, technology must be continuously improved to improve the quality of millet products. We all know that millet processing equipment must be indispensable when processing millet. The main reason is that this kind of equipment is more affordable than other processing equipment, and it is very convenient to use and operate, so in the processing process of millet, the processing manufacturer still cares about the processing technology of millet. Let me tell you how to improve the processing technology of millet processing equipment.
In order to improve the quality of millet processing and production, when operating millet equipment, we should pay attention to two main adjustments to the work of millet machines. The second is the adjustment of the inlet and outlet guillotine blades. According to the relationship between the different adjustments of the rice blade and the inlet and outlet guillotine blades and the pressure and friction in the grinding chamber, to grind out the millet with full grain, white color and good quality, we can follow the following steps: method to adjust and operate.
The gap between the rice knife and the drum should be moderate, and the gap should not be smaller than the lateral diameter of the rice grains, otherwise, the rice grains will be easily broken, and the gap should not be larger than the longitudinal diameter of the rice grains, otherwise the rice grains will be rough. Therefore, the gap between rice knives should be selected between the longitudinal and lateral diameters of rice grains. Practice shows that the gap between rice knives should be a little oblique, that is, the end near the exit gate knife is slightly larger, so that the milled rice will be more complete. Related reading: What are the reasons that affect the efficiency of millet processing equipment
The inlet and outlet guillotine blades should be well matched. The opening of the general inlet guillotine blades can be controlled at 1/2 of the entire opening, but not more than 2/3. Some operators remove the inlet guillotine blades and let the inlets be fully opened. Generally, do not do this. , Because after all are opened, there are too many grains, the pressure in the whitening chamber is too high, and the rotation resistance is too large. If the outlet guillotine does not cooperate well for a while, the belt will slip, and even the machine will be stuck or damaged. The exit knife should be controlled flexibly. During operation, after the gap between the rice knife and the opening of the entrance knife are adjusted according to the regulations, they can be fixed. The operator only needs to operate the exit knife with the right hand, and the left hand stretches out the palm to connect the rice grains under the exit. , to see if the rice grains are complete and the beige is white. If there is a lot of broken rice, open the gate knife with a large opening. If the rice grains are rough, you can turn off the small outlet guillotine, and both should be taken into account until the quality of rice milling meets the requirements.
The above is how Henan Grain Machinery explained how to improve the processing technology of millet. The above methods can be used to improve the processing technology of millet and improve the efficiency of processing and output of millet. If you have other questions about millet processing, you can continue to browse our website or consult us.
Learn more about China Win Tone Machinery: rice processing equipment, millet processing equipment, corn processing equipment, corn processing machinery, grain processing equipment: www.wintonemachinery.com